Description
End Caps
Zinc (Flush end cap standard)
DOOR HEIGHT in. – EXIT DEVICE
84
FINISHES – EXITS
US26D – SATIN CHROMIUM
ACCESSORIES – EXITS
NOT APPLICABLE
Push Bar
OPTIONAL Photoluminescent push bar cover available
ELECTRICS – EXITS
NOT APPLICABLE
Cover Tube
Aluminum
DOOR WIDTH in. – EXIT DEVICE
48
Latchbolt Type
- Top – 1/2″ (13mm) throw, stainless steel
- Bottom – 1/2″ (13mm) throw, held retracted during door swing, stainless steel
Stile Width
- 2-1/8″ (54mm) minimum stile width required
- All stile widths are measured from door edge
Fasteners
- Wood and machine screws
- Thru-bolts
Strikes
- Stainless steel
- Mortised into aluminum frame
Door Width
- 36″ (914mm) field sizeable to 30″ (762mm) panic-rated door
- 48″ (1219mm) field sizeable to 36″ (914mm) panic- rated door
Door Thickness
1-3/4″ (44mm) – Standard
Trim
Archer, August, William or Withnell lever with escutcheon trim
Cover
Stainless steel, zinc
Maximum Door Height
- 7′ (2134mm) – Standard
- 8′ (2438mm) – Optional
Projection
- 3″ (76mm) in undogged position
- 2-5/8″ (67mm) in dogged position
Product Overview 4600 Series Grade 1 Concealed Vertical Rod Exit Device
Functions:
- 01 – Exit Only (device)
- 02 – Dummy, pull when device is dogged down (46DT)
- 03 – Night Latch, key retracts latch bolt (46NL)
- 08 – Cylindrical Escutcheon, key locks or unlocks lever (46CE)
- 14 – Blank Escutcheon, always operable (passage) (46BE)
Applications:
Aluminum Storefront Only
Notes:
- Center line prep is 40″ (1016mm) – If door prep elevation is lower, a longer top rod will need to be ordered
- Recommended to be used on appropriately reinforced doors
- Available in Less Bottom Rod and Electrified versions also
Certifications:
- ANSI/BHMA A156.3_2014 Grade 1
- UL305 Listed for Panic Hardware
Finishes:
- US26D and US32D
- US3, US4, US10B US26, BLK – available at extended lead times
- Trim is not available in US32D
- Anti-Microbial available with US26D and US32D
Warranty:
Lifetime
Dogging:
- Hex dogging feature standard on panic-rated labeled doors
- Cylinder dogging available on panic rated devices – specify “CD”. 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8″ (29mm) – 1-3/8″ (35mm) is required.
Notes:
- Center line prep is 40″ (1016mm) – If door prep elevation is lower, a longer top rod will need to be ordered
- Recommended to be used on appropriately reinforced doors
- Available in Less Bottom Rod and Electrified versions also
Rod Length:
- Rods for 7′ (2134mm) door – Standard
- Rods for 8′ (2438mm) and 10′ (3048mm) doors – Optional
- Door height of 7′ (2134mm) requires 33-1/2″ (851mm) top rod length
- Door height of 8′ (2438mm) requires 45-1/2″ (1156mm) top rod length
Reviews
There are no reviews yet.