1-1/4 in. Standard 6 Outlet Indexing Valve with 5 and 6 Zone Cams2 / each

Description

The 1-1/4 in. Standard 6 Outlet Indexing Valve offers a reliable and economical way to automate multiple zoned irrigation systems. This Hydro Indexing Valve has an 1-1/2 in. inlet and 6-1 in. outlets, all are slip fit. The simple design of the indexing valve ensures easy installation and maintenance.

• Valve is recommended for use in a pump driven irrigation systems
• Standard flow stem and disc assembly that comes equipped with the valve requires a minimum of 10 GPM, the low-flow stem and disc assembly (can be purchased separately) requires a minimum of only 6 GPM
• Valve can run from 2 to 6 zones based on the chosen cam configuration, 5 and 6 zone cams included
• A special white cam is needed for this valve to run as a 3 or 4 zone valve (not included)
• 10 PSI pressure minimum
• 1 1/2 in. inlet
• 1 1/4 in. outlet
• Great alternative to individual solenoid valves
• 1 valve can replace up to (6) 1 1/4 in. solenoids
• 1 above ground Fimco valve controls all zones eliminating the need to dig into the ground to locate electric solenoid valve boxes
• Works either manually or fully automatic with a controller (not included) to turn on and off the water supply (pump or solenoid)
• Only use standard clear PVC cement (not included) for installation of the valve and allow 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in the construction of the indexing valve, purple primer has a similar effect and should only be applied to PVC pipe and not the valve housing

Features

ARB775W