Description
Arch-Flex 333 is the first arch product that comes on a roll. Designed for all radius curves, Arch-Flex also resists dents and paint chipping, cuts easily with a utility knife or scissors, is applied with all-purpose joint compound, and will not rust. The tape is manufactured with patented tear strips to create easy straight-to-curve transitions. To apply, measure entire curved application by using Arch-Flex 333 as a tape measure. Cut to measured length plus 1 in. Fold Arch-Flex 333 completely in half at crease and remove tear strip by folding along perforations and pulling. Leave tear strip intact where a straight-to-curve transition is required. Apply all-purpose compound to corner. Starting from one end, press Arch-Flex 333 firmly into compound. Re-cut length to fit if needed. Wipe down compound and adjust to a smooth curve. Apply second coat immediately and let dry. Apply final coat, let dry, and sand.
-
California residents
see Prop 65 WARNINGS - 3.375 in. x 50 ft.
- Tight radius curves, inside 90 curves
- Barrel vaults, groin cathedral ceilings, free-form curves
- Arched windows and doors
- Taping around circular air ducts
Features
| Item Weight | 1.4 |
| Color Family | Black |
| Product Weight (lb.) | 2.4 |
| Number of Rolls Included | 1 |
| Material | Paper |
| Returnable | 180-Day |
| Product Thickness (mm) | 2 |
| Tape Length (ft.) | 50 |
| Product Width (in.) | 3.375 |
4
Reviews
There are no reviews yet.