Description
Projection
- 3″ (76mm) in undogged position
- 2-5/8″ (67mm) in dogged position
Warranty
Maximum Door Height
- 7′ (2134mm) – Standard
- 8′ (2438mm) – Optional
- 10′ (3048mm) – Optional (panic device only)
Cover
Stainless steel, zinc
Trim
- Archer, August, Charles, Johnston, Joshua, Louis, Warren, William or Withnell lever with escutcheon trim
- Pull plate trim (excluding 45PT)
- Rim cylinder x optional pull
Door Thickness
1-3/4″ (44mm) – Standard
Applications
- Heavy duty commercial
- NOT recommended for single-rabbet double egress frames
- NOT recommended for doors with inset greater than 1/8″
Fasteners
- Wood and machine screws
- Thru-bolts
Stile Width
- 4″ (102mm) minimum stile width required
- All stile widths are measured from door edge
OriginalName
4501 CLB 36″ x 96″ US10B REV 3
Latchbolt Type
- Top – 1/2″ (13mm) throw, Pullman type with automatic dead-latching, stainless steel
- Bottom – 1/2″ (13mm) throw, Pullman type, held retracted during door swing, stainless steel
DOOR WIDTH in. – EXIT DEVICE
36
Cover Tube
Aluminum
ELECTRICS – EXITS
NOT APPLICABLE
ACCESSORIES – EXITS
NOT APPLICABLE
FINISHES – EXITS
NOT APPLICABLE
MISC. – EXITS
NOT APPLICABLE
DOOR HEIGHT in. – EXIT DEVICE
96
End Caps
- Standard end cap (zinc)
- OPTIONAL Flush end cap (zinc)
RATINGS – EXITS
STANDARD – NON-FIRE RATED
Product Overview Grade 1 Concealed Vertical Rod Exit Device, Less Bottom Rod
Functions:
01 – Exit Only (device)
Applications:
- Heavy duty commercial
- NOT recommended for single-rabbet double egress frames
- NOT recommended for doors with inset greater than 1/8″
Notes:
- Center line prep is 40″ (1016mm) – If door prep elevation is lower, a longer top rod will need to be ordered
- Recommended to be used on appropriately reinforced doors
- NOT recommended for doors with inset greater than 1/8″, ex. double egress frames or jamb depths over 5-3/4″ or greater
- A spring loaded fire bolt 2-649-0166 must be used on fire-rated LBR devices used on a pair of doors to ensure the device’s fire rating
Certifications:
- ANSI/BHMA A156.3-2014 Grade 1
- UL305 Listed for Panic Hardware
- UL/cUL Listed for up to 3 hours for “A” labeled doors up to 10′ in height
- UL10C Positive Pressure Rated
- UL10B Neutral Pressure Rated
- Complies with ANSI A117.1 for accessible buildings and facilities
Finishes:
- US3, US4, US10B, US26, US26D, US32D, BLK
- Trim not available in US32D
Warranty:
Lifetime
Dogging:
- Hex key dogging standard on panic rated devices
- Cylinder dogging available on panic rated devices – specify “CD”. 3902 Mortise cylinder with standard cam sold separately. Cylinder Length of 1-1/8″ (29mm) – 1-3/8″ (35mm) is required.
Door Width:
- 36″ (914 mm) field sizeable to 30″ (762mm) panic-rated door and 28″ (711mm) fire-rated door
- 48″ (1219 mm) field sizeable to 36″ (914mm) panic- or fire-rated door
- Reference electrified exit device for door width specifications
Notes:
- Center line prep is 40″ (1016mm) – If door prep elevation is lower, a longer top rod will need to be ordered
- Recommended to be used on appropriately reinforced doors
- NOT recommended for doors with inset greater than 1/8″, ex. double egress frames or jamb depths over 5-3/4″ or greater
- A spring loaded fire bolt 2-649-0166 must be used on fire-rated LBR devices used on a pair of doors to ensure the device’s fire rating
Rod Length:
- Rods for 7′ (2134mm) door – Standard
- Rods for 8′ (2438mm) and 10′ (3048mm) doors – Optional
- Door height of 7′ (2134 mm) requires 34-5/8″ (879 mm) top rod length
- Door height of 8′ (2438mm) requires 46-5/8″ (1184mm) top rod length
- Extension rod kits available 2′ (610mm) or 3′ (914mm)
Strikes:
- Stainless steel with plated rollers included standard with panic devices
- Solid stainless steel included standard with fire rated devices
- Top strike mortised into frame
- Double door strike for use with CVR and RIM device available
Reviews
There are no reviews yet.