Description
Projection
- 2-7/16″ (62mm) in undogged position,
- 1-3/16″ (30mm) in dogged position
Maximum Door Height
- 7′ (2134mm) – Standard
- 8′ (2438mm) – Optional
- 10′ (3048mm) – Optional (with use of extension rods) – Panic only
Cover
Cast brass, bronze, stainless steel, zinc
Trim
- Archer, August, or Withnell lever with escutcheon
- Archer, August, Withnell lever with key-in-lever trim
- Raised lip pull
- Pull plate trim
- Rim cylinder x optional pull
Door Thickness
1-3/4″ (44mm) – Standard
Door Width
- 36″ (914mm) field sizeable to 30″ (762 mm) door
- 48″ (1219mm) field sizeable to 36″ (914 mm) door
Dogging
Hex key dogging standard on panic-rated devices
Fasteners
- Wood and machine screws
- Thru-bolts
Notes
- Trim is handed,
- Recommended to be used on appropriately reinforced doors
Latchbolt Type
- Top – 3/8″ (9mm) throw, with automatic dead-latching, stainless steel
- Bottom – 3/8″ (9mm) throw, held retracted during door swing, stainless steel
DOOR WIDTH in. – EXIT DEVICE
48
ACCESSORIES – EXITS
NOT APPLICABLE
FINISHES – EXITS
ALM – PAINTED SATIN ALUMINUM
DOOR HEIGHT in. – EXIT DEVICE
84
End Caps
Painted steel, plated steel, stainless steel
RATINGS – EXITS
FIRE RATED
Product Overview 4700 Series Grade 1 Surface Vertical Rod Exit Device
Functions:
- 01 – Exit Only (device)
- 02 – Dummy (47DT)
- 03 – Night Latch (47KN)
- 08 – Key in Lever, key locks or unlocks lever (47KE)
- 14 – Blank Escutcheon, always operable (passage) (47BE)
- See catalog 4700 How To Order for additional functions
Applications:
Commercial
Notes:
- Trim is handed,
- Recommended to be used on appropriately reinforced doors
Certifications:
- ANSI/BHMA A156.3-2014, Grade 1
- UL305 Listed for Panic Hardware
- UL/cUL Listed for up to 1 1/2 hours for “B” labeled doors
- UL10C Positive Pressure Rated
- UL10B Neutral Pressure Rated
- Complies with ANSI 117.1 for accessible buildings and facilities
Finishes:
US3, US32D, ALM, DBZ
Warranty:
Five-years
Rod Length:
- Rods for 7′ (2134mm) door – Standard,
- Rods for 8′ (2438mm) door – Optional,
- Door height of 6′ 8″ (2032mm) requires 31-1/4″ (794mm) top rod length
- Door height of 7′ (2134mm) requires 35-1/4″ (895mm) top rod length
- Door height of 8′ (2438mm) requires 47-1/4″ (1200mm) top rod length
- Extension rods available, 2′ (610mm) or 3′ (914mm) for doors over 7′ (2134mm)
Stile Width:
- 4-1/2″ (114mm) – Minimum stile width required for single door and 5/8″ (16mm) stop
- 4″ (102mm) – Minimum stile width required for double doors
- 4-1/2″ (114mm) – Minimum stile width required for double door x Rim device with double door strike
- All stile widths are measured from door edge
Strikes:
- Stainless Steel with plated rollers – Included standard
- Surface applied to frame with slotted holes for easy adjustment
- Optional double door strike for use with surface vertical rod and rim devices
- Optional threshold strike for use with saddle threshold
Reviews
There are no reviews yet.